Tonight, we return to my series on the Large Hadron Collider (LHC). I previously wrote about one very important property of a collider, its energy. Tonight, I write about another important property, luminosity. Dictionary definitions of luminosity typically refer to the presence of light or brightness; in other words, a luminous object is easy to see, such as something that is illuminated.
Conceptually, the term luminosity as used in particle physics also refers to ease of detecting something. In his book, Not Even Wrong (associated with a blog of the same name), Peter Woit states the following:
Besides the energy of its [particle] beams, the most important characteristic of any collider is its "luminosity." The luminosity of a collider is a measure of how many particles are in the beam and how small the interaction region is in which the beams coming from opposite directions are brought together inside a detector (p. 19).
The most layperson-friendly description of the units of luminosity I've been able to find is "collisions per square centimeter per second...", from this Berkeley Lab document.
Greater density of particles' concentration -- how many of them there are, in how small of an area -- thus would make them easier to detect. The LHC's luminosity is planned to be 10 to the 34th power (that's a lot of zeroes).
Increasing colliders' luminosities, however, is very difficult to do, as discussed by Woit and also in this Stanford Linear Accelerator Center (SLAC) document. The SLAC document also includes a graph that shows the luminosity levels for a number of colliders, including the LHC.
Luminosity is serious business. Major international conferences known as LUMI '06 and LUMI '05 have been held to track research developments in this area.
Friday, June 29, 2007
Friday, June 15, 2007
Book Review: "The Physics of Basketball"
I thought I'd take a break from my series on the Large Hadron Collider (see the three previous postings below) to write a mini-review of a book I recently finished reading. The book is The Physics of Basketball, by U.S. Naval Academy professor John Fontanella, himself a former player.
It’s actually more of a lengthy monograph (~130 pages) than a typical book. The book concentrates heavily on the trajectory of basketball shots, both of the “nothing but net” variety and those that bounce around off the backboard and/or rim. Fontanella’s enumeration of all the forces acting on a released basketball shot (e.g., gravity, magnus, drag, and buoyancy) may have some similarity to the talk University of Illinois physicist Alan Nathan presented at last year’s Society for American Baseball Research (SABR) meeting on the aerodynamics of a flying baseball.
Fontanella also addresses a few other issues besides basketball shooting. One is the illusion of "hang time," or a player (former NBA star Gus Johnson being a favorite of the author) who's driving to the hoop "hanging or floating in air, apparently defying gravity and the laws of physics" (p. 121).
The author has a ready explanation for this phenomenon -- a player's initial upward movement is quick, but gravity slows the upward motion. According to a calculation by Fontanella, "a jumping player spends only 29% of the time in the bottom half of the jump. Correspondingly, a player must spend 71% of the time in the upper half of the jump" (p. 122). Thus, we see prolonged periods of a player high in the air.
Another question Fontanella addresses -- for those of you dying of curiosity -- is why you hear so much squeaking of the players' basketball shoes when you're observing from near the court (p. 115).
There’s an online NPR interview (link) with Fontanella you can listen to, which might help you decide if you want to read the book.
It’s actually more of a lengthy monograph (~130 pages) than a typical book. The book concentrates heavily on the trajectory of basketball shots, both of the “nothing but net” variety and those that bounce around off the backboard and/or rim. Fontanella’s enumeration of all the forces acting on a released basketball shot (e.g., gravity, magnus, drag, and buoyancy) may have some similarity to the talk University of Illinois physicist Alan Nathan presented at last year’s Society for American Baseball Research (SABR) meeting on the aerodynamics of a flying baseball.
Fontanella also addresses a few other issues besides basketball shooting. One is the illusion of "hang time," or a player (former NBA star Gus Johnson being a favorite of the author) who's driving to the hoop "hanging or floating in air, apparently defying gravity and the laws of physics" (p. 121).
The author has a ready explanation for this phenomenon -- a player's initial upward movement is quick, but gravity slows the upward motion. According to a calculation by Fontanella, "a jumping player spends only 29% of the time in the bottom half of the jump. Correspondingly, a player must spend 71% of the time in the upper half of the jump" (p. 122). Thus, we see prolonged periods of a player high in the air.
Another question Fontanella addresses -- for those of you dying of curiosity -- is why you hear so much squeaking of the players' basketball shoes when you're observing from near the court (p. 115).
There’s an online NPR interview (link) with Fontanella you can listen to, which might help you decide if you want to read the book.
Saturday, June 09, 2007
Large Hadron Collider Part III
Continuing on with our series on the Large Hadron Collider (LHC), today we'll address its energy aspects. Specifically, two primary questions are why high energies are needed, and how they are achieved. First, though, let's briefly go over the terminology for energy scales of magnitude.
The unit of energy referred to in particle physics is the electronvolt (eV). The most straightforward explanation of an electronvolt comes from this Fermilab document, which characterizes 1 eV as "very tiny." As illustrated on the page, if an electron passes through a 1.5 V battery (which many of you probably have in your home), that would represent 1.5 eV of energy.
Further, from dealing with computer memory sizes (bytes) or other measurment contexts, many of you are probably familiar with the terminology for thousandfold orders of magnitude, such as kilo (1,000 or 10^3, where ^ stands for raising to a power) and mega (1 million or 10^6). Continuing onward, we have giga (1 billion or 10^9) and tera (1 trillion or 10^12). This University College London document lists these milestones.
In fact, the Tevatron collider at Fermilab is so named because of its ability to reach 1 tera electronvolts ("TeV") of energy. As discussed below, the LHC will go even higher.
So why do we need ever-increasing energy performance from our particle colliders? It's because the new particles scientists are looking for tend to be very massive and, as a result of the direct relationship between energy and mass in Einstein's E = mc^2 (c standing for the speed of light, which gets squared), the creation of high-mass particles requires high energy. This Canadian document makes the basic point:
It is realized that the mass-energy relation (E = mc^2) provides a new way to get information about particles. If particles could be made very energetic and then used to collide with other particles, some of their energy could be converted into the creation of previously unknown particles. When particles are produced in a collision, they are not particles that were somehow inside the colliding ones. They are really produced by converting the collision energy into mass, the mass of other particles… Which particles will be produced is partly determined by their mass - the lighter they are, the easier it is to produced them [sic], other things being equal - and also by the probabilities calculated from the Feynman diagrams.
One type of particle that is eagerly being sought at the LHC is something known as the Higgs boson, about which I will have much to say later. The New Yorker magazine article that I linked to in the opening essay of this series talks about how the Higgs has not been found at the Tevatron, so the LHC, with its higher energy, is the next hope.
By now, the Higgs has been sought for so long that physicists have a pretty clear idea of how much it must weigh. The lower bound is around 120 times more than a proton... The upper bound is about 210 times as much as a proton. The most powerful collider currently in operation is Fermilab’s Tevatron, outside Chicago. The Tevatron, which smashes protons into antiprotons, can accelerate particles to an energy of just under a trillion electron volts, or one TeV... So far, the Tevatron has failed to reveal the Higgs, though physicists there are actively looking for it. The L.H.C. will accelerate particles to seven TeV, which means that it will be seven times as powerful as the Tevatron. This should be more than enough energy to produce the Higgs, if there is a Higgs to produce. It may also be enough to uncover much more than the Higgs... (page 3 of online New Yorker article).
OK, so finally, how have accelerators and colliders over the years been able to keep raising the energy levels capable of being studied? This Stanford Linear Accelerator Center (SLAC) document provides an excellent summary of the historical evolution of accelerators and colliders, including their increasing energy levels. Referring to a graph of accelerators’ particle energy plotted against a timeline from 1930-1990, the report states the following:
One of the first things to notice is that the energy of man-made accelerators has been growing exponentially in time. Starting from the 1930s, the energy has increased – roughly speaking – by about a factor of 10 every six to eight years. A second conclusion is that this spectacular achievement has resulted from a succession of technologies rather than from construction of bigger and better machines of a given type (pp. 38-39).
Further:
The [e]nergy that really matters in doing elementary particle physics is the collision energy – that is, the energy available to induce a reaction, including the creation of new particles… If two particles of equal mass traveling in opposite directions collide head on, however, the total kinetic energy of the combined system after collision is zero, and therefore the entire energy of the two particles becomes available as collision energy. This is the basic energy advantage offered by colliding-beam machines, or colliders (p. 40).
The brief summaries and excerpts above are meant simply to convey rudimentary ideas on the topic. The linked documents are, of course, available for you to read in toto, should you wish further information. Additional web documents and books are also available, and shouldn't be too hard to find via some web searching.
The unit of energy referred to in particle physics is the electronvolt (eV). The most straightforward explanation of an electronvolt comes from this Fermilab document, which characterizes 1 eV as "very tiny." As illustrated on the page, if an electron passes through a 1.5 V battery (which many of you probably have in your home), that would represent 1.5 eV of energy.
Further, from dealing with computer memory sizes (bytes) or other measurment contexts, many of you are probably familiar with the terminology for thousandfold orders of magnitude, such as kilo (1,000 or 10^3, where ^ stands for raising to a power) and mega (1 million or 10^6). Continuing onward, we have giga (1 billion or 10^9) and tera (1 trillion or 10^12). This University College London document lists these milestones.
In fact, the Tevatron collider at Fermilab is so named because of its ability to reach 1 tera electronvolts ("TeV") of energy. As discussed below, the LHC will go even higher.
So why do we need ever-increasing energy performance from our particle colliders? It's because the new particles scientists are looking for tend to be very massive and, as a result of the direct relationship between energy and mass in Einstein's E = mc^2 (c standing for the speed of light, which gets squared), the creation of high-mass particles requires high energy. This Canadian document makes the basic point:
It is realized that the mass-energy relation (E = mc^2) provides a new way to get information about particles. If particles could be made very energetic and then used to collide with other particles, some of their energy could be converted into the creation of previously unknown particles. When particles are produced in a collision, they are not particles that were somehow inside the colliding ones. They are really produced by converting the collision energy into mass, the mass of other particles… Which particles will be produced is partly determined by their mass - the lighter they are, the easier it is to produced them [sic], other things being equal - and also by the probabilities calculated from the Feynman diagrams.
One type of particle that is eagerly being sought at the LHC is something known as the Higgs boson, about which I will have much to say later. The New Yorker magazine article that I linked to in the opening essay of this series talks about how the Higgs has not been found at the Tevatron, so the LHC, with its higher energy, is the next hope.
By now, the Higgs has been sought for so long that physicists have a pretty clear idea of how much it must weigh. The lower bound is around 120 times more than a proton... The upper bound is about 210 times as much as a proton. The most powerful collider currently in operation is Fermilab’s Tevatron, outside Chicago. The Tevatron, which smashes protons into antiprotons, can accelerate particles to an energy of just under a trillion electron volts, or one TeV... So far, the Tevatron has failed to reveal the Higgs, though physicists there are actively looking for it. The L.H.C. will accelerate particles to seven TeV, which means that it will be seven times as powerful as the Tevatron. This should be more than enough energy to produce the Higgs, if there is a Higgs to produce. It may also be enough to uncover much more than the Higgs... (page 3 of online New Yorker article).
OK, so finally, how have accelerators and colliders over the years been able to keep raising the energy levels capable of being studied? This Stanford Linear Accelerator Center (SLAC) document provides an excellent summary of the historical evolution of accelerators and colliders, including their increasing energy levels. Referring to a graph of accelerators’ particle energy plotted against a timeline from 1930-1990, the report states the following:
One of the first things to notice is that the energy of man-made accelerators has been growing exponentially in time. Starting from the 1930s, the energy has increased – roughly speaking – by about a factor of 10 every six to eight years. A second conclusion is that this spectacular achievement has resulted from a succession of technologies rather than from construction of bigger and better machines of a given type (pp. 38-39).
Further:
The [e]nergy that really matters in doing elementary particle physics is the collision energy – that is, the energy available to induce a reaction, including the creation of new particles… If two particles of equal mass traveling in opposite directions collide head on, however, the total kinetic energy of the combined system after collision is zero, and therefore the entire energy of the two particles becomes available as collision energy. This is the basic energy advantage offered by colliding-beam machines, or colliders (p. 40).
The brief summaries and excerpts above are meant simply to convey rudimentary ideas on the topic. The linked documents are, of course, available for you to read in toto, should you wish further information. Additional web documents and books are also available, and shouldn't be too hard to find via some web searching.
Subscribe to:
Posts (Atom)